Interior Scaffolding FAQ - Metaltech https://www.metaltech.co Wed, 06 Nov 2024 16:50:47 +0000 en-CA hourly 1 https://wordpress.org/?v=6.9.4 When assembling a Jobsite Series 6′ Baker (I-CISC) and its 39″ extension (I-ISEX4PPNCAS), do we have to install a guardrail (I-CISGRJP)? https://www.metaltech.co/faq/when-assembling-a-jobsite-series-6%e2%80%b2-baker-i-cisc-and-its-39%e2%80%b3-extension-i-isex4ppncas-do-we-have-to-install-a-guardrail-i-cisgrjp/ Wed, 23 Dec 2020 16:35:01 +0000 https://www.metaltech.co/?post_type=faq&p=3303 Yes, a guardrail must be installed. Standards say that a guardrail is required if the platform height is 8′ or more for CSA standard and 10′ or more for ANSI & OSHA standards (this value can change depending on the local standards). Metaltech recommends the use of a guardrail even for a I-CISC without its […]

The post When assembling a Jobsite Series 6′ Baker (I-CISC) and its 39″ extension (I-ISEX4PPNCAS), do we have to install a guardrail (I-CISGRJP)? first appeared on Metaltech.

]]> Yes, a guardrail must be installed.

Standards say that a guardrail is required if the platform height is 8′ or more for CSA standard and 10′ or more for ANSI & OSHA standards (this value can change depending on the local standards).

Metaltech recommends the use of a guardrail even for a I-CISC without its extension, even if standards do not require it.

The post When assembling a Jobsite Series 6′ Baker (I-CISC) and its 39″ extension (I-ISEX4PPNCAS), do we have to install a guardrail (I-CISGRJP)? first appeared on Metaltech.

]]> Can we stack Jobsite Series 6′ Baker (I-CISC)? https://www.metaltech.co/faq/can-we-stack-jobsite-series-6%e2%80%b2-baker-i-cisc/ Wed, 23 Dec 2020 16:38:12 +0000 https://www.metaltech.co/?post_type=faq&p=3305 Yes, it is possible to stack up to three units one on top of the other. When stacking 2 units, a guardrail (I-CISGRJP) and the 14″ outriggers (I-CISO4) must be installed. When stacking 3 units, a guardrail (I-CISGRJP) and the 46″ outriggers (I-BMSO4TT) must be installed.

The post Can we stack Jobsite Series 6′ Baker (I-CISC)? first appeared on Metaltech.

]]> Yes, it is possible to stack up to three units one on top of the other.

  • When stacking 2 units, a guardrail (I-CISGRJP) and the 14″ outriggers (I-CISO4) must be installed.
  • When stacking 3 units, a guardrail (I-CISGRJP) and the 46″ outriggers (I-BMSO4TT) must be installed.

The post Can we stack Jobsite Series 6′ Baker (I-CISC)? first appeared on Metaltech.

]]> Can the Jobsite Series 6′ Baker (I-CISC) be installed in stairways? https://www.metaltech.co/faq/can-the-jobsite-series-6%e2%80%b2-baker-i-cisc-be-installed-in-stairways/ Wed, 23 Dec 2020 16:40:36 +0000 https://www.metaltech.co/?post_type=faq&p=3307 Yes, you just have to adjust the braces that support the platform, so it is horizontal. Each end can adjust separately every 2″ to be used in stairways.Remove casters when using on stairs.

The post Can the Jobsite Series 6′ Baker (I-CISC) be installed in stairways? first appeared on Metaltech.

]]> Yes, you just have to adjust the braces that support the platform, so it is horizontal. Each end can adjust separately every 2″ to be used in stairways.
Remove casters when using on stairs.

The post Can the Jobsite Series 6′ Baker (I-CISC) be installed in stairways? first appeared on Metaltech.

]]> Does the scaffolding tower (I-T3CISC) come with platform with trap door? https://www.metaltech.co/faq/does-the-scaffolding-tower-i-t3cisc-come-with-platform-with-trap-door/ Wed, 23 Dec 2020 16:42:01 +0000 https://www.metaltech.co/?post_type=faq&p=3309 No, this tower contains platform without trapdoor.

The post Does the scaffolding tower (I-T3CISC) come with platform with trap door? first appeared on Metaltech.

]]> No, this tower contains platform without trapdoor.

The post Does the scaffolding tower (I-T3CISC) come with platform with trap door? first appeared on Metaltech.

]]> With which product the leveling jacks (I-IBSJP12H4) can be used? https://www.metaltech.co/faq/with-which-product-the-leveling-jacks-i-ibsjp12h4-can-be-used/ Wed, 23 Dec 2020 16:43:14 +0000 https://www.metaltech.co/?post_type=faq&p=3311 These leveling jacks are used with interior scaffolding. They are compatible with: I-CISC I-BMSS I-CAISC I-CISCTP I-CISCAS I-CISCH1 I-CISCDW

The post With which product the leveling jacks (I-IBSJP12H4) can be used? first appeared on Metaltech.

]]> These leveling jacks are used with interior scaffolding. They are compatible with:

  • I-CISC
  • I-BMSS
  • I-CAISC
  • I-CISCTP
  • I-CISCAS
  • I-CISCH1
  • I-CISCDW

The post With which product the leveling jacks (I-IBSJP12H4) can be used? first appeared on Metaltech.

]]> Are the Jobsite Series 6′ Baker (I-CISC) & the Jobsite Series Perry style (I-CISCPY) compatible? https://www.metaltech.co/faq/are-the-jobsite-series-6%e2%80%b2-baker-i-cisc-the-jobsite-series-perry-style-i-ciscpy-compatible/ Wed, 23 Dec 2020 16:44:47 +0000 https://www.metaltech.co/?post_type=faq&p=3313 No, these two scaffolds are not compatible.

The post Are the Jobsite Series 6′ Baker (I-CISC) & the Jobsite Series Perry style (I-CISCPY) compatible? first appeared on Metaltech.

]]> No, these two scaffolds are not compatible.

The post Are the Jobsite Series 6′ Baker (I-CISC) & the Jobsite Series Perry style (I-CISCPY) compatible? first appeared on Metaltech.

]]> Can I use the rungs of the interior scaffolding to climb on the platform ? https://www.metaltech.co/faq/can-i-use-the-rungs-of-the-interior-scaffolding-to-climb-on-the-platform/ Wed, 23 Dec 2020 16:47:28 +0000 https://www.metaltech.co/?post_type=faq&p=3315 For the 6′ Baker (I-CISC, I-BMSS, I-CAISC) & 6′ (I-IRC, I-BM6S) scaffoldings, yes you have to use the rungs of the frame. If the scaffolding has a platform with trapdoor, you have to climb from the inside of the scaffold. If the platform does not have a trapdoor, climb from the outside of the scaffold […]

The post Can I use the rungs of the interior scaffolding to climb on the platform ? first appeared on Metaltech.

]]> For the 6′ Baker (I-CISC, I-BMSS, I-CAISC) & 6′ (I-IRC, I-BM6S) scaffoldings, yes you have to use the rungs of the frame. If the scaffolding has a platform with trapdoor, you have to climb from the inside of the scaffold. If the platform does not have a trapdoor, climb from the outside of the scaffold while respecting the “Maximum climbing distance” table in the assembly instruction. You can find the assembly instruction on our website under the product’s heading.

For the 6′ (I-CAIRC), 5′ (I-IMIS) and 4′ (I-IMCN, I-BM4S, I-IMAC) scaffoldings, no you cannot use the rungs to climb up or down the structure. You have to use the platforms.

The post Can I use the rungs of the interior scaffolding to climb on the platform ? first appeared on Metaltech.

]]> Can I remove the strap that is on the platform with trapdoor of the Jobsite Series 6′ Baker (I-CISCH1, I-CISCTP)? https://www.metaltech.co/faq/can-i-remove-the-strap-that-is-on-the-platform-with-trapdoor-of-the-jobsite-series-6%e2%80%b2-baker-i-cisch1-i-cisctp/ Wed, 23 Dec 2020 16:53:12 +0000 https://www.metaltech.co/?post_type=faq&p=3318 No, the doors must always be closed when you are on the platform. By closing the doors, we avoid falls and it adds rigidity to the guardrail’s structure.

The post Can I remove the strap that is on the platform with trapdoor of the Jobsite Series 6′ Baker (I-CISCH1, I-CISCTP)? first appeared on Metaltech.

]]> No, the doors must always be closed when you are on the platform. By closing the doors, we avoid falls and it adds rigidity to the guardrail’s structure.

The post Can I remove the strap that is on the platform with trapdoor of the Jobsite Series 6′ Baker (I-CISCH1, I-CISCTP)? first appeared on Metaltech.

]]> Can I leave the guardrail’s (I-CISGRJP, I-CAISCGR, I-BMSGRJP) doors open? https://www.metaltech.co/faq/can-i-leave-the-guardrails-i-cisgrjp-i-caiscgr-i-bmsgrjp-doors-open/ Wed, 23 Dec 2020 16:55:31 +0000 https://www.metaltech.co/?post_type=faq&p=3320 No, the doors must always be closed when you are on the platform. By closing the doors, we avoid falls and it adds rigidity to the guardrail’s structure.

The post Can I leave the guardrail’s (I-CISGRJP, I-CAISCGR, I-BMSGRJP) doors open? first appeared on Metaltech.

]]> No, the doors must always be closed when you are on the platform. By closing the doors, we avoid falls and it adds rigidity to the guardrail’s structure.

The post Can I leave the guardrail’s (I-CISGRJP, I-CAISCGR, I-BMSGRJP) doors open? first appeared on Metaltech.

]]> Is it possible to have bigger casters on the Jobsite Series 6′ Baker (I-CISC)? https://www.metaltech.co/faq/is-it-possible-to-have-bigger-casters-on-the-jobsite-series-6%e2%80%b2-baker-i-cisc/ Wed, 23 Dec 2020 16:57:22 +0000 https://www.metaltech.co/?post_type=faq&p=3322 Yes, the Jobsite Series 6′ Baker (I-CISCDW) have 6” casters. The Buildman 6′ Baker (I-BMSS) also have 6″ casters while having a higher capacity.

The post Is it possible to have bigger casters on the Jobsite Series 6′ Baker (I-CISC)? first appeared on Metaltech.

]]> Yes, the Jobsite Series 6′ Baker (I-CISCDW) have 6” casters. The Buildman 6′ Baker (I-BMSS) also have 6″ casters while having a higher capacity.

The post Is it possible to have bigger casters on the Jobsite Series 6′ Baker (I-CISC)? first appeared on Metaltech.

]]>